Neptune 3000 l/h water pump

Neptune Hydroponics energy efficient submersible water pumps can be used for culture systems, fresh and marine water aquariums, ponds and terrariums. NH3000 charges in fountains, ponds, ditches, waterfalls as well as hydroponic and drip systems. The pump is equipped with a thermostat that automatically shuts off the motors if they overheat during use. Thanks to their design and their special motors, these models enjoy a longer life time and lower energy consumption.

The Neptune NH3000 pump is made up of a sealed structure, with a completely sealed and oil-cooled motor. A filter inside the motor prevents collapses in the mechanism.

For correct use, the pump must always remain in the water and never in a depth greater than 2 meters.

The water temperature should not exceed 35º.

The water pressure is conditioned to the flow or the dimensions of the hose that we use, the water will come out with more or less pressure due to the resistance and weight of the water. Using an irrigation lance, use a minimum of 2000l/h to have the correct water flow, although we recommend 4500l/h to obtain the perfect pressure.

For drip irrigation, a minimum of 3000l/h is recommended for each square meter of cultivation.

Technical specifications of the Neptune Hydroponics NH-3000 Submersible Water Pump

• Neptune Hydroponics
• Model NH-3000
• Voltage/Frequency: 220V-240V/50Hz
• Compatible with fresh or marine water
• Flow and Power: 3000L/h - 85W
• Maximum Height: 3.5m
• Maximum Depth: 2m
• Silent
• Self-protected motor against overheating
• Minimum power consumption
• For 25mm pipe
• Dimensions: 11,5x8x8,5cm
• Pump weight: 1kg