DSC-2 240V CO2 Device Station

The DSC-2 is a 120V controlled outlet designed to activate devices, such as ventilation fans, in response to the detection of faults or elevated CO2 levels. This versatile module facilitates the control of any CO2 device, conforming to the global voltage standard (100-240 VAC, 50/60 Hz), and supporting loads of up to 10 amps.

LED Indicators:

• RAPID green Blinking: If the LED blinks quickly, it indicates that the module has not been assigned to the controller or does not have a solid connection to it. *Pressing the small button on the module will assign/link the module during initial installation.
• SLOW green Blinking: A slow blink of the green LED indicates that the module is assigned and connected to the controller, and the module is currently turned off.
• SOLID green: If the LED stays solid (not blinking), it signals that the modules are assigned, connected, and currently turned on.
• Red Blinking: A change to red blinking indicates that the module has experienced an overload. To reset the overload, disconnect the module from the power source.
• By pressing and holding the button on the DSC-2, users can manually override the module and turn it on/off.

All DS-type modules offer a global plug.

Package Contents:

• 1 x Device Station
• 1 x 16ft RJ12 Cable
• 1 x 4ft RJ12 Cable
• 1 x RJ12 T-Splitter 

Technical Specifications:

• Input Voltage: 100~240 VAC, 50/60Hz
• Output Current: 10A
• Output Voltage: 100~240 VAC, 50/60Hz
• Working Environments: Temperature 32-122°F, Humidity=90%
• Package Dimensions: 85mm(L) x 80mm(W) x 90mm(H)
• Gross Weight per Package: 0.34kg